- per page
White Industries standard English 1.29 x 24 tpi threaded lockring. Sometimes called the Fixed ENO Lock Ring
The MI5 front hub is White Industries' off-road workhorse. It's designed for use with rim brakes only. If you're looking for a hub that can hold up to the severe punishment of off-road riding, the MI5 is an excellent choice.
The MI6 front hub is White Industries' disc brake specific hub. If you're looking for a hub that can hold up to the severe punishment of off-road riding, the MI6 is an excellent choice.
The Venti 20mm thru front hub is White Industries' serious downhill disc hub. The Venti hub is designed specifically for 20mm thru axle forks. The hub incorporates a six bolt rotor mount machined into the hub shell resulting in a stronger, more durable shell.
White Industries ENO freewheels can be threaded onto White Industries' ENO hubs and other manufacturers' hubs. Utilizing sealed cartridge bearings, the ENO freewheel is durable, reliable, and easily maintained.
Use the White Industries freewheel tool to remove a freewheel from the White Industries ENO or any other freewheel without removing the end caps.
White Industries splined fixed gear cogs are made from of 8620 case hardened steel. The cogs are designed to work with White Industries’ fixed gear hubs and Wheelbuilder PowerTap hubs.
White Industries' eccentric caliper mount works with the Eric's Eccentric Disc ENO hub. The eccentric disc hub moves in an elliptical arc tensioning the chain.
White Industries designed the H2 front road hub to be lightweight without sacrificing durability. H2 flanges were designed to hold up to the additional stresses of low spoke count radial lacing patterns.
White Industries designed the H3 rear road hub to be lightweight without sacrificing durability. The H3 was engineered specifically for the demands of road riding. Bearing sizing and placement are only a few (of many) details that have been optimized to minimize axle deformation and maximize hub durability to provide years of trouble free service.
White Industries' Eric's Eccentric Disc ENO hub is used to convert a multi-speed bike with vertical dropouts into a single-speed/fixed gear. The disc is ISO standard six bolt on non-drive side and freewheel compatible on the drive side.
The MI5 rear hub is White Industries' off-road workhorse. It is designed for use with rim brakes only. If you're looking for a hub that can hold up to the severe punishment of off-road riding, the MI5 is an excellent choice.
The MI6 rear hub is White Industries' disc brake specific hub. If you're looking for a hub that can hold up to the severe punishment of off-road riding, the MI6 is an excellent choice.
White Industries designed the Daisy exclusively for the additional strength required by tandem bicycles. The Daisy's elegant high flange hub shell was purposefully designed to optimize wheel strength.
White Industries designed the Daisy exclusively for the additional strength required by tandem bicycles. The Daisy's elegant high flange hub shell was purposefully designed to optimize wheel strength.
- per page
