White Industries ENO Freewheel

White Industries ENO freewheels can be threaded onto White Industries' ENO hubs: Standard ENO or Eccentric ENO and other manufacturers' hubs. Utilizing sealed cartridge bearings, the ENO freewheel is durable, reliable, and easily maintained.

The ENO freewheel was developed to solve the problems that plagued Single Speed and BMX riders: bearing contamination, limited tooth configurations and lack of quick engagement. White Industries concentrated on these issues in developing the ENO freewheel which features sealed cartridge bearings, O-ring seals, a 36-tooth ratchet and availability in 16T-23T in single tooth increments.

The 1.37" x 24 tpi threading works with either a 1/8" or 3/32" chain.

The ENO freewheel features a machined inner driver and machined outer gear case resulting in a freewheel that runs concentrically without the tight loose spots common to other freewheels.

The advantage of the cartridge bearing is that it is sealed from the elements such as mud, grit, and water. White Industries freewheels utilize an extra moisture seal that is seated on the freewheel backside, which protects the freewheel from water and debris. The other benefit is that the bearing is nicely contained in one simple unit and easily pulled and replaced when worn. If necessary, the internals can be cleaned and the bearings replaced using the ENO freewheel tool and following the instructions in the White Industries Freewheel Disassembly Instruction Manual.

Additional information: