Wheelbuilder.com :: Replacement Parts & Tools

Replacement Parts & Tools

Replacement Parts & Tools
 
Products

Industry Nine XD One-By (1x11) Driver Body
Industry Nine XD One-By (1x11) Driver Body

Industry Nine's XD Driver converts any I-9 hub to be compatible with SRAM XX1 or X01 one-by (1x11) cassettes. The XD Driver is machined from a single block of aluminum and weighs about ten grams less than a standard freehub body. Manufactured to the same unyielding specifications as all I9 products, the XD conversion driver comes with all three bearings, and all six pawls and springs installed.


$179.99
Kogel Ceramic Bearings
Kogel Ceramic Bearings

Crafting a durable bearing demands perfect balance and deep insight into the materials being used and how they will interact with each other and the outside elements. Kogel understands the principle of bearing balance and is one of the industry leaders in ceramic bearing durability and performance.

Specs: Grade 3, ABEC 5 hybrid ceramic bearings. Front hub, rear hub, hubshell, and freehub ceramic bearing options.


$100.00
Park Tool 3-Way Internal Nipple Wrench - SW-15
Park Tool 3-Way Internal Nipple Wrench - SW-15

Park Tools' innovative 3-way SW-15 wrench features three different sized wrenches to fit internal spoke nipples. Featuring a 3.2mm square drive, plus 5mm and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. The SW-15 works with wheels made by numerous manufacturers including, but not limited to: FSA, Blackwell, Planet-X, HED, Rolf, Bontrager, Campagnolo and Mavic.


$14.50
Park Tool AV-5 Axle Vise Tool
Park Tool AV-5 Axle Vise Tool

Using a bench vise the Park Tool AV-5 allows you to hold a variety of axles, spindles or any Park Tool Freewheel Remover/Lockring tool. The Park Tool AV-5 prevents movement while work is being done.


$35.95
Park Tool Axle Vise Tool AV-1
Park Tool Axle Vise Tool AV-1

The Park Tool AV-1 allows you to hold an axle in place using a bench vise. The Park Tool Axle Vise Tool prevents movement while work is being done on the hub.


$14.99
Park Tool Four-Sided Spoke Wrench - SW-40
Park Tool Four-Sided Spoke Wrench - SW-40

The black Park Tool Four-Sided Spoke Wrench's unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. The SW-40 uses the same world-famous design and high quality materials as all Park Tool spoke wrenches.


$9.50
Park Tool Four-Sided Spoke Wrench - SW-42
Park Tool Four-Sided Spoke Wrench - SW-42

The red Park Tool Four-Sided Spoke Wrench's unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. The SW-42 uses the same world-famous design and high quality materials as all Park Tool spoke wrenches.


$9.50
Park Tool Internal Nipple Spoke Wrench - SW-16 & SW-16.3
Park Tool Internal Nipple Spoke Wrench - SW-16 & SW-16.3

The Park Tool Internal Nipple Spoke Wrench is designed to reach recessed nipples found on many deep section aero rims.


$11.95
Park Tool Master Mechanic Spoke Wrench - SW-20.2 & SW-20
Park Tool Master Mechanic Spoke Wrench - SW-20.2 & SW-20

The Park Tool Master Mechanic Spoke Wrench is an investment cast butterfly wrench poured from the best steel, precisely machined, heat treated for hardness, then polished and plated. The SW-20.2 and SW-20 wrench is a smooth, solid steel spoke wrench designed and built to fit perfectly in your hand and provide years of daily service.


$25.99
Park Tool Spoke Tension Meter - TM-1
Park Tool Spoke Tension Meter - TM-1

A tension meter is a necessity for any amateur or professional wheel builder to ensure uniformly tensioned spokes. The Park Tool TM-1 Tension Meter accurately and reliably measures the tension of each of the spoke in a wheel, as well as the relative tension between all the spokes in a wheel.


$82.95
| MSRP: $84.95
Shop by Brand
Wheelbuilder Carbon Rim Guide

Join our email newsletter.

Wheelbuilder.com Gift Certificate

Cart is empty
Testimonials







PayPal Logo