Wheelbuilder.com :: Hubs :: Mountain :: Project 321

Project 321

Project 321
 
Products

Project 321 ISO Disc Front Hub
Project 321 ISO Disc Front Hub

Building on the success of their Lefty hub, Project 321, developed an all user friendly 169g ISO Disc front hub, available in 9mm, 15mm, and 20mm axle fitments.

Specs: Available in 28, 32h. Weight is 169g.


$185.00
Project 321 ISO Disc Rear G2 MTB Hub
Project 321 ISO Disc Rear G2 MTB Hub

The second generation Project 321 rear mountain bike disc brake hub is 70g lighter than its predecessor. It is also easier to adjust and service. The G2 hub utilizes two angular contact bearings, increasing bearing life and lateral load capacity. They can be accurately loaded to adjust bearing preload for zero play and to compensate for bearing wear. The hub is also designed with a very high oil capacity allowing the user to add oil and dampen the noise level if desired.

Specs: Available in 28, 32h. Weight is 275g.


$415.00
Project 321 1.0 Lefty Hub
Project 321 1.0 Lefty Hub

The 114.2g Project 321 Lefty hub provides a stylish and well manufactured offering if you are running a lefty fork configuration.

Specs: Available in 24, 28, 32h. Weight is 114.2g.


$185.00
Project 321 2.0/Supermax Lefty Hub
Project 321 2.0/Supermax Lefty Hub

The 114g Project 321 ISO Lefty SuperMax hub was designed specifically for the Cannondale Lefty SuperMax. The hub offers an extra-wide hubshell and improved bracing angles for a stiffer and more durable wheel. Project 321 offers a variety of beautifully anodized color options for the hub. The Project 321 ISO Lefty SuperMax hub is a stylish and quality choice for lefty fork users. Lefty hub cap and bolt available.

Specs: Available hole count 28, 32. Weight 114g.


$185.00
Project 321 ISO Disc Boost Front MTB Hub
Project 321 ISO Disc Boost Front MTB Hub

This Boost offering from Project 321 is a wider spaced hub specifically designed for 115x15 forks. Project 321 set their Boost front hub apart by moving the left flange out by 5mm but actually leaving the right flange in the same position. In doing this, spoke tension ratio is much closer to equilibrium, yielding a stronger and stiffer wheel.

Specs: Available in 28, 32h. Weight is 180g.


$185.00
Project 321 ISO Disc Boost Rear MTB Hub
Project 321 ISO Disc Boost Rear MTB Hub

The Project 321 Boost G2 rear hub is designed for bikes with 148x12 spacing. The G2 rear hubs are redesigned with a magnetically actuated, 6 pawl ratchet drive system. This unique drive mechanism allows each rider to customize engagement speed. Select from 144 or 216 points of engagement and two sets of pawls allowing for a loud or quiet freehub.

Specs: Available in 28, 32h. Weight is 282g.


$415.00
Shop by Brand
Wheelbuilder Carbon Rim Guide

Join our email newsletter.

Wheelbuilder.com Gift Certificate

Cart is empty
Testimonials







PayPal Logo