Wheelbuilder.com :: Hubs :: Mountain

Mountain

Mountain
 
Products

Chris King Classic High Flange Front Hub
Chris King Classic High Flange Front Hub

Chris King Classic high flange front hub is 100% manufactured in Portland, Oregon. The proprietary Chris King stainless steel bearings (designed and made in-house by Chris King) feature lightweight low-friction seals and are hand checked before being installed. The high flange allows for a stiffer overall wheel build. 

Specs: Available hole count 28, 32, 36. Weight 136g.

Chris King Classic high flange front hub is 100% manufactured in Portland, Oregon. The proprietary Chris King stainless steel bearings (designed and made in-house by Chris King) feature lightweight low-friction seals and are hand checked before being installed. The high flange allows for a stiffer overall wheel build. 

$241.00
Chris King Classic High Flange Rear Hub (10 Speed)
Chris King Classic High Flange Rear Hub (10 Speed)

Chris King Classic high flange rear hub is 100% manufactured in Portland, Oregon. Chris King proprietary stainless steel bearings (designed and made in-house by Chris King) feature lightweight low-friction seals and are hand checked before being installed.

Specs: Available hole count 28, 32, 36. Weight 302g.

Chris Kings proprietary stainless steel bearings (designed and made in-house by Chris King) feature lightweight low-friction seals and are hand checked before being installed.

$451.00
Chris King Classic Low Flange Front Hub
Chris King Classic Low Flange Front Hub

Chris King Classic low flange front hub is 100% manufactured in Portland, Oregon. The proprietary Chris King stainless steel bearings (designed and made in-house by Chris King) feature lightweight low-friction seals and are hand checked before being installed.

Specs: Available hole count 28, 32, 36. Weight 112g.

Chris King Classic high flange front hub is 100% manufactured in Portland, Oregon. The proprietary Chris King stainless steel bearings (designed and made in-house by Chris King) feature lightweight low-friction seals and are hand checked before being installed. The high flange allows for a stiffer overall wheel build. 

$241.00
Chris King Classic Low Flange Rear Hub (10 Speed)
Chris King Classic Low Flange Rear Hub (10 Speed)

Chris King Classic low flange rear hub is 100% manufactured in Portland, Oregon and features the legendary King stainless steel sealed bearings. A Chris King hub will set your wheel apart from a standard factory wheel. 

Specs: Available hole count 28, 32, 36. Weight 266g.


$451.00
Chris King ISO B Front Hub (Boost)
Chris King ISO B Front Hub (Boost)

The Chris King ISO B (Boost) front mountain bike hub uses proprietary angular contact stainless steel bearings that feature lightweight low-friction seals which offer excellent protection against water and dust intrusion. Designed and made in-house by Chris King the bearings are hand checked before being installed. Ceramic bearings built to the same high quality standards are available as an upgrade.  

Specs: Available hole count 28, 32. Weight 176g.

The Chris King ISO B (Boost) rear mountain bike hub is 100% manufactured in Portland, Oregon. This Boost offering from Chris King is a completely new hub shell. Wider spaced flanges allow for symmetric wheel builds resulting in a stronger wheel. 

$241.00
Chris King ISO B Rear Hub (Boost)
Chris King ISO B Rear Hub (Boost)

The Chris King ISO B (Boost) rear mountain bike hub is a completely new hub shell with wider spaced flanges for more symmetric wheel builds. This hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.

Specs: Available hole count 28, 32. Weight 341g.

The Chris King ISO B (Boost) rear mountain bike hub is 100% manufactured in Portland, Oregon. This Boost offering from Chris King is is a completely new hub shell. Wider spaced flanges allow for symmetric wheel builds resulting in a stronger wheel. 


$460.00
Chris King ISO DH Disc Brake Rear Hub
Chris King ISO DH Disc Brake Rear Hub

The Chris King Classic ISO DH disc rear mountain bike hub is available in 150 x 10mm, 150 x 12mm, and 157 x 12mm axle configurations. This hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.

Specs: Available hole count 28, 32, 36. Weight 338g.

The Chris King Classic ISO disc rear mountain bike hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.


$488.00
Chris King ISO Disc Brake Rear Hub
Chris King ISO Disc Brake Rear Hub

The Chris King Classic ISO disc rear mountain bike hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This unique drive mechanism is the source of the distinctive Chris King "angry bee" freewheel sound.

Specs: Available hole count 28, 32, 36. Weight 336g.

The Chris King Classic ISO disc rear mountain bike hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.


$460.00
Chris King ISO Disc SD Front Hub
Chris King ISO Disc SD Front Hub

The 166g Chris King Classic ISO disc front mountain bike hub a high performance, long lasting hub. Manufactured in Portland, Oregon all hubs feature legendary Chris King sealed bearings. A Chris King hub will set your wheel apart from a standard factory wheel.

Specs: Available hole count 24, 28, 32, 36. Weight 166g.


$241.00
Chris King ISO Front Disc LD Hub
Chris King ISO Front Disc LD Hub

The Chris King ISO LD hub boasts a lightweight design, excellent serviceability, and legendary Chris King durability. The oversized LD (Large Diameter) hub is available in both 15mm and 20mm axle configurations and is ideal for those seeking maximum durability. Manufactured in Portland, Oregon all hubs feature legendary Chris King sealed bearings. A Chris King hub will set your wheel apart from a standard factory wheel.

Specs: Available hole count 28, 32, 36. Weight 197g.


$241.00
Shop by Brand
Wheelbuilder Carbon Rim Guide

Join our email newsletter.

Wheelbuilder.com Gift Certificate

Cart is empty
Testimonials






 SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

PayPal Logo