Wheelbuilder.com :: Hubs :: Mountain :: Chris King

Chris King

Chris King
 
Products

Chris King ISO Disc SD Front Hub
Chris King ISO Disc SD Front Hub

The 166g Chris King Classic ISO disc front mountain bike hub a high performance, long lasting hub. Manufactured in Portland, Oregon all hubs feature legendary Chris King sealed bearings. A Chris King hub will set your wheel apart from a standard factory wheel.

Specs: Available hole count 24, 28, 32, 36. Weight 166g.


$241.00
Chris King ISO Front Disc LD Hub
Chris King ISO Front Disc LD Hub

The Chris King ISO LD hub boasts a lightweight design, excellent serviceability, and legendary Chris King durability. The oversized LD (Large Diameter) hub is available in both 15mm and 20mm axle configurations and is ideal for those seeking maximum durability. Manufactured in Portland, Oregon all hubs feature legendary Chris King sealed bearings. A Chris King hub will set your wheel apart from a standard factory wheel.

Specs: Available hole count 28, 32, 36. Weight 197g.


$241.00
Chris King ISO Disc Brake Rear Hub
Chris King ISO Disc Brake Rear Hub

The Chris King Classic ISO disc rear mountain bike hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This unique drive mechanism is the source of the distinctive Chris King "angry bee" freewheel sound.

Specs: Available hole count 28, 32, 36. Weight 336g.

The Chris King Classic ISO disc rear mountain bike hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.


$460.00
Chris King ISO B Front Hub (Boost)
Chris King ISO B Front Hub (Boost)

The Chris King ISO B (Boost) front mountain bike hub uses proprietary angular contact stainless steel bearings that feature lightweight low-friction seals which offer excellent protection against water and dust intrusion. Designed and made in-house by Chris King the bearings are hand checked before being installed. Ceramic bearings built to the same high quality standards are available as an upgrade.  

Specs: Available hole count 28, 32. Weight 176g.

The Chris King ISO B (Boost) rear mountain bike hub is 100% manufactured in Portland, Oregon. This Boost offering from Chris King is a completely new hub shell. Wider spaced flanges allow for symmetric wheel builds resulting in a stronger wheel. 

$241.00
Chris King ISO B Rear Hub (Boost)
Chris King ISO B Rear Hub (Boost)

The Chris King ISO B (Boost) rear mountain bike hub is a completely new hub shell with wider spaced flanges for more symmetric wheel builds. This hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.

Specs: Available hole count 28, 32. Weight 341g.

The Chris King ISO B (Boost) rear mountain bike hub is 100% manufactured in Portland, Oregon. This Boost offering from Chris King is is a completely new hub shell. Wider spaced flanges allow for symmetric wheel builds resulting in a stronger wheel. 


$460.00
Chris King ISO DH Disc Brake Rear Hub
Chris King ISO DH Disc Brake Rear Hub

The Chris King Classic ISO DH disc rear mountain bike hub is available in 150 x 10mm, 150 x 12mm, and 157 x 12mm axle configurations. This hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.

Specs: Available hole count 28, 32, 36. Weight 338g.

The Chris King Classic ISO disc rear mountain bike hub utilizes the patented and proven Chris King RingDrive engagement mechanism, which uses 72 teeth on each drive ring for quick engagement. This is the source of the Chris King "angry bee" freewheel sound.


$488.00
Chris King ISO Lefty LD Hub
Chris King ISO Lefty LD Hub

The Chris King Lefty LD hub gives Cannondale Lefty users the beautiful aesthetics, legendary performance and durability of Chris King ISO hubs on a Lefty fork. The Lefty LD was designed, manufactured and assembled in Portland, Oregon. A Chris King hub will set your wheel apart from a standard factory wheel.

Specs: Available hole count 28, 32. Weight 200g.


$264.00
Chris King ISO Lefty SuperMax Hub
Chris King ISO Lefty SuperMax Hub

The Chris King Lefty SuperMax hub gives Cannondale Lefty SuperMax users the beautiful aesthetics, legendary performance and durability of Chris King ISO hubs. The hub was designed specifically for the Cannondale Lefty Supermax and is built with an extra-wide hubshell and oversized axle for added wheel stiffness and durability. It is manufactured and assembled in Portland, Oregon. A Chris King hub will set your wheel apart a standard factory wheel.

Specs: Available hole count 28, 32. Weight 215g.


$264.00
Chris King R45 Disc Centerlock Front Hub
Chris King R45 Disc Centerlock Front Hub

The 144g Chris King R45 Disc Centerlock front hub was designed for disc brake equipped road and cyclocross bikes. This hub features the legendary King stainless steel sealed bearings and is manufactured in Portland, Oregon. A Chris King hub will set your wheel apart a standard factory wheel.

Specs: Available hole count 24, 28, 32. Weight 144g.


$263.99
Chris King R45 Disc Centerlock Rear Hub
Chris King R45 Disc Centerlock Rear Hub

The elegantly machined R45 Centerlock disc hub meets the requirements of the world's most demanding road, cyclocross riders with long-term performance, durability, and unparalleled braking force. Inside the sleek hub body is a stiff 17mm alloy axle for superior performance under the lateral stresses encountered in corners and aggressive sprints.

Specs: Available hole count 24, 28, 32. Weight 265g.


$481.99
Shop by Brand
Wheelbuilder Carbon Rim Guide

Join our email newsletter.

Wheelbuilder.com Gift Certificate

Cart is empty
Testimonials







PayPal Logo